Oxy sensor wire question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Oxy sensor wire question [Re: dave1223] #1036825 10/27/11 11:42 PM

Joined: Feb 2008

Posts: 86

Idaho

Cochip

Getting the Wheeling Fever

I own a '94 and I noticed something similar on both of my 02 sensors. I think what your seeing is a form of heat shielding that is needed for the wires leading from the sensor. Because of their close proximity to the exhaust this is needed. As far as dating the sensor based on this, I don't think that is possible.

Entire Thread
Subject	Posted By	Posted
Oxy sensor wire question	dave1223	10/25/11 11:35 PM
Re: Oxy sensor wire question	Cochip	10/27/11 11:42 PM
Re: Oxy sensor wire question	dave1223	10/27/11 11:50 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.519s Queries: 16 (3.516s) Memory: 0.5958 MB (Peak: 0.6288 MB) Data Comp: Off Server Time: 2026-06-06 13:32:02 UTC
Valid HTML 5 and Valid CSS