I fitted a new rear main seal into the bracket/carrier (whatever) for my daughter's Montero and the service manual calls for anaerobic sealant, but I'm not sure where to put it. Any tips?

Also, is Vaseline OK on the end of the crank shaft to help bed in the new rear main seal?

Cheers fellas

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...