Input Shaft Bearing replacement?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Input Shaft Bearing replacement? [Re: Staceman] #1038176 12/14/11 12:03 AM

Joined: Jan 2003

Posts: 1,355

Three Oaks, MI

Elbow_Greese Offline

Body Damage is Cool

Yup, talking about the input shaft bearing in the tranny.
I thought I replied earlier, but in any case, the decision was to go with a Marlin Crawler HD rebuilt instead of tearing into this one.
He's going to keep it for at least 5 more years for work field trips in New Mexico.
Thanks for the help!

Todd

1986 Pickup extracab longbed "Woody edition"
SAS - 33's, 5.29's, lockright rear.

02 IS300 SportCross - my "DD"
94 2wd v6 extracab
04 Outback Wagon- wife's/family car

Entire Thread
Subject	Posted By	Posted
Input Shaft Bearing replacement?	Elbow_Greese	11/19/11 03:55 AM
Re: Input Shaft Bearing replacement?	OOP'S	11/27/11 05:36 PM
Re: Input Shaft Bearing replacement?	Eck	12/12/11 06:16 PM
Re: Input Shaft Bearing replacement?	Greg_Canada	12/13/11 03:30 PM
Re: Input Shaft Bearing replacement?	Staceman	12/13/11 03:35 PM
Re: Input Shaft Bearing replacement?	Elbow_Greese	12/14/11 12:03 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.395s Queries: 16 (3.393s) Memory: 0.6023 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-05-27 13:27:07 UTC
Valid HTML 5 and Valid CSS