Front end noise

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front end noise [Re: bingocouple] #1038968 12/08/11 09:54 PM

Joined: Feb 2009

Posts: 146

Stow, OH

Dryver

Wheeler

I recall some postings about reversing the innards of the stock hubs to get them to be engaged at all times. I think this was done to Canadian models because of failure issues with the hubs. Maybe this was done to yours?

01 Convertible; Electric Fan; 3" Up Your Kia lift spacers; Tj 104's; 31x10.5x15's on Centerlines; Rear LSD.
GONE, all I have left are a few spare parts and the wheels.

Entire Thread
Subject	Posted By	Posted
Front end noise	bingocouple	12/07/11 06:59 PM
Re: Front end noise	bingocouple	12/07/11 08:02 PM
Re: Front end noise	Dryver	12/08/11 09:54 PM
Re: Front end noise	TheGoat	12/09/11 01:34 PM
Re: Front end noise	Sportege_Panicmech	12/11/11 01:42 AM
Re: Front end noise	timd75	12/13/11 04:15 PM
Re: Front end noise	bingocouple	12/14/11 02:47 AM
Re: Front end noise	bingocouple	12/08/11 02:29 AM
Re: Front end noise	TheGoat	12/08/11 01:06 PM
Re: Front end noise	sportedge	12/25/11 08:34 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 16 (3.492s) Memory: 0.6108 MB (Peak: 0.6438 MB) Data Comp: Off Server Time: 2026-06-06 15:54:52 UTC
Valid HTML 5 and Valid CSS