Well , I got a bunch of my parts , so I went out and got started today.I put on my new rotors , and pads all the way around , new CV axles , bearings on the front.The passenger side went smooth and had front and back done in about an hour and a half.The driver side gave me a little bit of issues , on the back the hub was a PITA to get off , was sticking to the E-brake pads but I finally got it off.Going back on was a little easier , I used the lug nuts to squeeze it back on.
The biggest time waster was the front , trying to get the 36MM nut off the hub.It took me about an hour using my impact gun , it would only come off a little at a time then seize up again so I would soak it with more PB blaster and let it sit for a few.All in all it took me 5 hours to change CV axles , bearings , rotors and pads on the front , and rotors and pads on the back.I took a couple of pics but will have to get them online , then I will post them on here.