I got the springs all in , and installed the new link kit on the rear stabilizer bar , and everything all torqued in. I didn't put the rear bump stops in yet , was getting too cold out again , but no big hurry on that.I then took it for a drive and wow , what a difference with the upcountry springs in , handles way better. Had the speed up to about 70 miles an hour , no vibrations at all , steering wheel stays straight , no pulling.My front suspension kit is on the way , so once everything is replaced on the front end , I will take it in and get it all aligned.
Here are a couple pics , nothing special , I need to get it out where I can take pictures without being too close to only get the wheel wells. I forgot to take measurements before I took everything apart , not sure what stock is , but I now have a hair over 21" from center of rim to wheel well lip , and you can notice the lift visibly.









The top 2 pics are the front and the bottom 2 are the rears.