Sorry to be "flogging a dead horse" but there were some questions asked in this old trailtalk thread that I still have not found answers to.

Since my SAW install I have noticed that my inner CV boot is leaking on the small side/shaft end and I was wondering... <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
(1) Are the OEM clamps "user servicable" I cant see any easy way to tighten them.
(2) If using a stainless steel hose type clamp, will that not put the whole thing out of balance due to the tightening nut.
(3) If I replace with a zip tie can that really get the boot tight enough. Even a mechanic I know says he uses zip ties, anyone here have any objections to zip ties.

Thanx