Cam Caps Torque Specs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Cam Caps Torque Specs #1040904 01/25/12 06:20 PM

Joined: Jun 2011

Posts: 32

CA, USA

Howah

Getting the Wheeling Fever

Can someone tell me torque specs for a 95 montero sr camshaft bearing caps (12mm and 10mm bolts). I am unable to locate them in fsm. Searched online and found specs for 6g72 to be 14 ft-lbs for the 12mms and 8 ft-lbs for the 10mms.

95 Montero SR

Entire Thread
Subject	Posted By	Posted
Cam Caps Torque Specs	Howah	01/25/12 06:20 PM
Re: Cam Caps Torque Specs	Canyonero	01/25/12 07:07 PM
Re: Cam Caps Torque Specs	heathdogg	01/25/12 07:11 PM
Re: Cam Caps Torque Specs	off-roader	01/25/12 07:16 PM
Re: Cam Caps Torque Specs	heathdogg	01/25/12 07:23 PM
Re: Cam Caps Torque Specs	Howah	01/25/12 09:43 PM
Re: Cam Caps Torque Specs	heathdogg	01/25/12 11:31 PM
Re: Cam Caps Torque Specs	4ePikanini	01/26/12 08:01 AM
Re: Cam Caps Torque Specs	Howah	01/26/12 09:05 AM
Re: Cam Caps Torque Specs	mynion	11/12/15 06:28 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.534s Queries: 15 (3.532s) Memory: 0.6102 MB (Peak: 0.6432 MB) Data Comp: Off Server Time: 2026-06-17 07:02:35 UTC
Valid HTML 5 and Valid CSS