This is what I've been using for torque specs, since I couldn't find the information in the reassembly section of the FSM. This is on page 00-33 of the FSM.

[Linked Image]

The top part got cut off a little bit. The top section lists "Standard bolt and nut tightening torque" and the bottom section you can see is for "Flange bolt and nut tightening torque".

Edit: Just wanted to point out that they are listing the actual bolt size, not the socket size, so make sure not to over torque. Those bolts will stretch and break if over torqued.

Last edited by jinstv; 01/25/12 07:11 PM.
1995 Montero SR
2" Body Lift
35x12.50x15 Cooper Discoverer STT
Aisins