What is the function of the "hold" button?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: What is the function of the "hold" button? [Re: ArenD] #1041352 02/03/12 02:34 PM

Joined: Jan 2012

Posts: 31

elizabethtown ky

EDWINWKU

Getting the Wheeling Fever

i have also found mine to be useful going up hills so i dont roll back and have to restart.

Entire Thread
Subject	Posted By	Posted
What is the function of the "hold" button?	ArenD	02/03/12 06:01 AM
Re: What is the function of the "hold" button?	off-roader	02/03/12 09:48 AM
Re: What is the function of the "hold" button?	EDWINWKU	02/03/12 02:34 PM
Re: What is the function of the "hold" button?	JohnnyBfromPeoria	02/04/12 04:16 AM
Re: What is the function of the "hold" button?	ArenD	02/04/12 05:26 PM
Re: What is the function of the "hold" button?	sasnydley	02/05/12 11:20 PM
Re: What is the function of the "hold" button?	mxmikie	02/06/12 01:36 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.504s Queries: 16 (3.502s) Memory: 0.6034 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-06-22 20:20:52 UTC
Valid HTML 5 and Valid CSS