Quote
I actually dont have a floor jack, i usually borrow my friends.

Anyways...maybe im not communicating whats going on effectively. The flare nut on the hose end is loose, i just need to figure out how it unscrews off the pump end, when i unscrew it, the hole rubber hose twists.


Maybe someone can chime in on this but the flare nut should spin without the hose spinning also. If they're stuck together maybe try a penetrating oil to get them to dislodge from each other. Otherwise, you'll simply have to spin the pump off the nut some the hose will eventually bind up if you try to keep spinning it.

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page