Flipping ball joints

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Flipping ball joints #1042995 02/28/12 07:43 PM

Joined: Sep 2008

Posts: 509

Tucker, Ga

willwinchforfood Offline

Rock Warrior

Have I read correctly that flipping the ball joints on a Gen 1 with Gen 1 arms is no good? It breaks tie rod ends?
John

SOLD!!: 91 LS 95 SR Rear LSD front 95 LS front brakes Dons Bumper 10k Gorilla/Promark winch Safari Snorkel Dual bouncy 31's

1991 Chevy Suburban 33's. All other stock.

Entire Thread
Subject	Posted By	Posted
Flipping ball joints	willwinchforfood	02/28/12 07:43 PM
Re: Flipping ball joints	RECON45	02/28/12 08:07 PM
Re: Flipping ball joints	TOASTY	02/28/12 09:05 PM
Re: Flipping ball joints	DougH	02/28/12 09:30 PM
Re: Flipping ball joints	RECON45	02/28/12 10:48 PM
Re: Flipping ball joints	justice	02/28/12 11:25 PM
Re: Flipping ball joints	Chief	02/29/12 02:33 AM
Re: Flipping ball joints	LandRaider	02/29/12 03:01 AM
Re: Flipping ball joints	fasteddy	02/29/12 03:14 AM
Re: Flipping ball joints	willwinchforfood	02/28/12 11:05 PM
Re: Flipping ball joints	off-roader	02/28/12 11:13 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.526s Queries: 15 (3.523s) Memory: 0.6152 MB (Peak: 0.6482 MB) Data Comp: Off Server Time: 2026-06-19 16:38:11 UTC
Valid HTML 5 and Valid CSS