Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Caravan 3.0 Block Oil Filter Adapter Blues #1043198 03/04/12 05:23 PM
Joined: May 2010
Posts: 50
C
crazyhal Offline OP
Getting the Wheeling Fever
Which holes do I block of to keep oil from running out from behind my drivers side motor mount? I looked and looked and the best I could tell was that the raider oil pump kept oil from flowing back there.


1990 SWB 3.0
Re: Caravan 3.0 Block Oil Filter Adapter Blues [Re: crazyhal] #1043199 04/06/12 03:07 AM
Joined: May 2010
Posts: 50
C
crazyhal Offline OP
Getting the Wheeling Fever
Figured it out... I took 1/16 felpro gasket paper...doubled it and put it between motor mount plate and oil filter adapter. No leak.


1990 SWB 3.0







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.009s Queries: 15 (0.007s) Memory: 0.5866 MB (Peak: 0.6347 MB) Data Comp: Off Server Time: 2026-07-16 07:35:36 UTC
Valid HTML 5 and Valid CSS