Torsion Bars--EMU/Sway-a-way/Etc.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Torsion Bars--EMU/Sway-a-way/Etc. #1043252 03/05/12 02:36 PM

Joined: Mar 2012

Posts: 4

Dallas, TX

Raiderman

Need a Spot

Anyone have a set of Heavy Duty Torsion Bars made by EMU or Sway-a-way, etc.

I have a 1989 Dodge Raider (same as Mitsubishi Montero)3.0L V6, 5spd.

Thanks,

Entire Thread
Subject	Posted By	Posted
Torsion Bars--EMU/Sway-a-way/Etc.	Raiderman	03/05/12 02:36 PM
Re: Torsion Bars--EMU/Sway-a-way/Etc.	Mudraider	03/07/12 03:07 AM
Re: Torsion Bars--EMU/Sway-a-way/Etc.	Raiderman	03/08/12 04:07 AM
Re: Torsion Bars--EMU/Sway-a-way/Etc.	losduarte	03/14/12 01:40 AM

Moderated by 4x4Wire, code33, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.038s Queries: 15 (3.521s) Memory: 0.5980 MB (Peak: 0.6310 MB) Data Comp: Off Server Time: 2026-06-09 16:34:22 UTC
Valid HTML 5 and Valid CSS