I sold my Monty 2 years ago without ever putting on the turbo conversion parts. I have almost everything to do this. Anything that could be upgraded was after learning the ins and outs from forum members. I have close to $1200 in stuff that I will part with for the first $500 someone comes up with. Here is a partial list of what I have. Buyer will get this and any other monty parts I have that I didn't think of. I prefer local pickup and can deliver most anywhere in the Southeast. I'm in Augusta during the week and Milledgeville or Atlanta on weekends.

Stock turbo in great condition with machined/ ported high flow mods
New cast exhaust manifold port matched to turbo, stress relieved
Intake manifold ported and matched for a 52 mm TB
Rebuilt never installed 52 mm TB with Trilogy Turbo(?) new injectors (worth $300 by themselves)
Complete 87 Starion harness uncut but for upgrade to later model AFM
Complete air filter assembly from gen 1 Eclipse with improved AFM
The correct Starion CPU/ Engine management computer.
Hard pipes for the correct un cut intercooler. High flow down pipe
Braided oil lines for the turbo, braided water lines and correct thermostat housing.
New exhaust studs, gaskets, hardware etc. All the small parts needed.

Last edited by whitelespaul; 03/26/12 09:51 AM.

83 mitsu flat bed 2.6l weber, 88 auto tranny, 2" body lift, 4.625 LSD, 235/85-16E mudders (33 x 9.50).