master cylinder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: master cylinder [Re: rxinhed] #1045270 04/14/12 06:22 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

Get a set of metric flare nut wrenches - the nuts on the hard lines are very soft and will round off very easily with normal open end wrenches - use penetrating juice, too.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
master cylinder	cjsmontero	04/14/12 03:42 AM
Re: master cylinder	boostin	04/14/12 05:05 AM
Re: master cylinder	cjsmontero	04/14/12 07:27 AM
Re: master cylinder	MartySoCal	04/14/12 01:57 PM
Re: master cylinder	rxinhed	04/14/12 04:55 PM
Re: master cylinder	fasteddy	04/14/12 06:22 PM
Re: master cylinder	cjsmontero	04/21/12 05:07 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.599s Queries: 16 (3.597s) Memory: 0.6059 MB (Peak: 0.6389 MB) Data Comp: Off Server Time: 2026-07-14 19:48:47 UTC
Valid HTML 5 and Valid CSS