|
|
|
|
 V6 timing belt replacement
#1046118
05/04/12 04:07 PM
|
Joined: Oct 2008
Posts: 59
OP
Getting the Wheeling Fever
|
Hi All
After installing new springs and getting a rusted gas tank fixed up, I now have another item to deal with.
My T100 is a 1994 with the 3.0L V6 3V3e engine.
Way back in 1999 I had head gasket work done on a a recall. While they did the gasket work I had them also install a new belt. The truck now has 140,000 miles and run fine.
So I guess it's time for a new timing belt. Was wondering how big a job it is? How many hours? What the cost would be if I have a shop do it (not a dealer).
How long does a water pump last?
Is it time to replace tensioners and idlers?
Just wondering if any of you have taken on this job and would do it again or have a shop do it.
L
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.554s Queries: 15 (3.551s) Memory: 0.6062 MB (Peak: 0.6392 MB) Data Comp: Off Server Time: 2026-06-06 09:17:23 UTCValid HTML 5 and Valid CSS 
