Quote
Guys, here is a picture of DD setup:
http://www.pirate4x4.com/forum/showthread.php?t=696803

Everything foward of & including the 2 aluminium plates should bolt up to the Mitsu transfer case?? Is that correct.

& the front should bolt straight to the Mitsu tranny??

This seems too easy . I must be wrong!


You are wrong.
You're gonna need a custom plate to replace the smaller round plate. That plate is cut and drilled to bolt to a np231, or Dana300(and maybe others). You need one that bolts to the mitsu, which is a very different pattern. The other thing to think of is that little coupler shaft and the spline/diameter, which are probably different too.

<img src="/forums/images/graemlins/cheers.gif" alt="" />

Last edited by dannytuned; 05/10/12 01:30 AM.
2001Sport 3.0-Headers-Cage-RoofChop-NP231/D300-D44/ARB-Ford9/Yukon/3Link-37's+H1's-PSC Assist-108:1