Why Can't I find Any UPPER Control Arm Bushings??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Why Can't I find Any UPPER Control Arm Bushings?? [Re: Bubba] #1046603 05/15/12 12:07 AM

Joined: Mar 2006

Posts: 422

Flagstaff, Az

heathdogg

Mudrunner

The uppers are a shaft kit NAPA #280-3607. It's a shaft kit. Metal bushings that thread into the control arm. That's why they are not finding bushings. I would have hoped that NAPA had smarter people there, but I guess they all can't be like my store.

Blacktero: 90 Montero Lwb V6 RS Model. 16" Toyota Alloy Rims, Dual Bouncy's; Gen II Front Rotors & Calipers; Rear LSD

Sraider: 87 Raider 2.6 base. Work yet to be done.

Entire Thread
Subject	Posted By	Posted
Why Can't I find Any UPPER Control Arm Bushings??	Bubba	05/14/12 11:16 PM
Re: Why Can't I find Any UPPER Control Arm Bushings??	heathdogg	05/15/12 12:07 AM
Re: Why Can't I find Any UPPER Control Arm Bushings??	mxmikie	05/15/12 02:28 AM
Re: Why Can't I find Any UPPER Control Arm Bushings??	KrzyDav	05/15/12 02:45 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 8.207s Queries: 16 (3.487s) Memory: 0.5995 MB (Peak: 0.6325 MB) Data Comp: Off Server Time: 2026-06-13 20:19:03 UTC
Valid HTML 5 and Valid CSS