|
|
|
|
Removable side windows from hard top
#1047386
05/28/12 09:36 PM
|
Joined: Feb 2004
Posts: 164
OP
Wheeler
|
In the process of doing a full repaint I removed the side windows from the hardtop. I kind of like the open air feel of the top. I'm looking at options for making the windows "removable". The rear side windows (the non sliding ones) came out simply, the are attached with bolts. If I use the single side sealant tape and not the double side foam tape they should be easy to remove for the summer months. I'm hoping they won't leak with single sided sealant foam tape. The front sliding ones are the tricky ones, since they are pressed in with a horrible tar tape. It's the only thing that holds them to the top. Has anyone found a good mod to make them "removable" with a latch mechanism or bolts?
---------------------- '87 4Runner
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.516s Queries: 15 (3.514s) Memory: 0.5945 MB (Peak: 0.6275 MB) Data Comp: Off Server Time: 2026-07-14 21:33:02 UTCValid HTML 5 and Valid CSS