Replacement Window Molding

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Replacement Window Molding #1047604 06/02/12 07:57 PM

Joined: Feb 2004

Posts: 164

Santa Barbara, CA

Chunky

Wheeler

Any suggestions on finding replacement window molding. I had my truck repainted. They had to pull the window to weld some spots on the A pillar. In the process they jacked the moldings. I can get them from the factory but they're pretty pricey, I'm looking for a cheaper alternative.

Attached Files

1265130-IMG_0068.jpg (0 Bytes, 54 downloads)

----------------------
'87 4Runner

Entire Thread
Subject	Posted By	Posted
Replacement Window Molding	Chunky	06/02/12 07:57 PM
Re: Replacement Window Molding	Snowtoy	06/02/12 09:17 PM
Re: Replacement Window Molding	Chunky	06/02/12 10:10 PM
Re: Replacement Window Molding	Snowtoy	06/02/12 10:55 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.493s Queries: 16 (3.491s) Memory: 0.5987 MB (Peak: 0.6438 MB) Data Comp: Off Server Time: 2026-07-16 10:29:35 UTC
Valid HTML 5 and Valid CSS