Quote
ok .. heres the "trick " for the sail panel (black trim piece)

1st , push the bottom forward to unlock the lower clip
2nd , push up to release the 2 top clips
3rd , pull down to release the middle clips , and remove .

the clips are vertually usless at this point now , becuse you can not re install the panel in reverse , and you can not remove the clips successfully , well at least I have never been successfull . I usually just "punch out" the old clips and replace with new toyotafiberglass clips


I have a little writeup on that procedure:
- http://www.4crawler.com/4x4/CheapTricks/index.shtml#BpillarTrim

It all makes sense once you look at what the clips look like.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code