ok,,,,
I see part numbers in FAQs.
My concerns are getting things apart and having not having right parts and paying all that shipping for nothing(help). Part # listings in FAQs are from folks with Gen1s with AT or 2.6s,,,these have smaller diameter axles.
Are the MT larger diameter in all aspects???? Requreing different needlebearings, differential seal(or seals), and knuckle seals.
On rockauto you have to pay attention--ex., they list one brand boot and it says "fits all but AT,,,and it's the one for the AT. So I sure don't trust bearing #s(they show a roller bearing for a needle bearing)and seal #s.
.
edit:
OK, now I just found DIY in FAQs.
Still have MT axle part # questions.
Also, I don't see how I can get a hammer in there to smack ball joints with the axle in the way.
.
All boots are specificly for MT, as are the snaprings inside the diff,, or wherever they go,,, so I'm not sure on these other parts.
(I've never done CV boots before on anything).

On Rockauto , of coarse each part is comming from a different wharehouse <img src="/forums/images/graemlins/frown.gif" alt="" />. AutoZombie and O'riely can't get boots for any Montero.
.