Engine/Transmission Bolt Patterns

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine/Transmission Bolt Patterns [Re: Trooper-san] #1048301 06/21/12 10:56 PM

Joined: Apr 2006

Posts: 1,193

Bouse az

mxmikie

Body Damage is Cool

none they are different wide and narrow do not interchange what motor is in the truck ???? 2.6 or 2.0 ????

Last edited by mxmikie; 06/21/12 10:58 PM.

it dosent have to be surrounded by water to be an island

Entire Thread
Subject	Posted By	Posted
Engine/Transmission Bolt Patterns	Trooper-san	06/21/12 05:12 PM
Re: Engine/Transmission Bolt Patterns	mxmikie	06/21/12 10:56 PM
Re: Engine/Transmission Bolt Patterns	Trooper-san	06/22/12 08:39 AM
Re: Engine/Transmission Bolt Patterns	fasteddy	06/22/12 11:18 PM
Re: Engine/Transmission Bolt Patterns	goobuds	06/23/12 01:43 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.123s Queries: 16 (3.956s) Memory: 0.6020 MB (Peak: 0.6350 MB) Data Comp: Off Server Time: 2026-06-22 00:52:44 UTC
Valid HTML 5 and Valid CSS