Engine/Transmission Bolt Patterns

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine/Transmission Bolt Patterns [Re: mxmikie] #1048302 06/22/12 08:39 AM

Joined: Jun 2003

Posts: 258

San Jose CA

Trooper-san Offline

Mudrunner

Sorry. Guess I forgot that part. Both engines are G54b, 2.6 liter engines. They are the same engine, except that one is a narrow block and one a wide block. Is it 12 1/4 and 13 1/4? I can't imagine why Mitsubishi did such a thing.

1989 Trooper, 2.6
1989 Trooper, 2.8
1992 Ford F-350, 7.3

My Photos

Entire Thread
Subject	Posted By	Posted
Engine/Transmission Bolt Patterns	Trooper-san	06/21/12 05:12 PM
Re: Engine/Transmission Bolt Patterns	mxmikie	06/21/12 10:56 PM
Re: Engine/Transmission Bolt Patterns	Trooper-san	06/22/12 08:39 AM
Re: Engine/Transmission Bolt Patterns	fasteddy	06/22/12 11:18 PM
Re: Engine/Transmission Bolt Patterns	goobuds	06/23/12 01:43 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 7.114s Queries: 16 (3.659s) Memory: 0.6017 MB (Peak: 0.6347 MB) Data Comp: Off Server Time: 2026-06-04 23:42:16 UTC
Valid HTML 5 and Valid CSS