92 Montero engine re-assembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 92 Montero engine re-assembly [Re: m4ff3w] #1048310 06/22/12 05:46 AM

Joined: Mar 2003

Posts: 2,324

SLO County, CA 93453

KrzyDav

Body Damage is Cool

I always put masking tape(I don't trust rags)on intake cause I like to drop nuts and such in manifold holes and whereever else I can do damage.

dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.

Entire Thread
Subject	Posted By	Posted
92 Montero engine re-assembly	m4ff3w	06/21/12 05:54 PM
Re: 92 Montero engine re-assembly	FrankR	06/21/12 06:21 PM
Re: 92 Montero engine re-assembly	m4ff3w	06/21/12 06:53 PM
Re: 92 Montero engine re-assembly	4ePikanini	06/21/12 07:57 PM
Re: 92 Montero engine re-assembly	m4ff3w	06/21/12 08:59 PM
Re: 92 Montero engine re-assembly	KrzyDav	06/22/12 05:46 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.504s Queries: 16 (3.502s) Memory: 0.6047 MB (Peak: 0.6377 MB) Data Comp: Off Server Time: 2026-06-03 20:22:27 UTC
Valid HTML 5 and Valid CSS