|
|
|
|
3VZE Motor Mount Longevity
#1048610
06/29/12 01:31 AM
|
Joined: Apr 2000
Posts: 4,860
OP
Roll Me Over
|
Is there one side that tends to fail sooner or more often than the other with this motor? If so, which side?
Classifieds & Suzuki Moderator
|
|
Re: 3VZE Motor Mount Longevity
[Re: code33]
#1048611
06/29/12 05:02 AM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
I think the passenger side fails as that is the side that resists most of the drive train torque when going forward. Usually helps to wrap a chain around the mounts to keep them from pulling apart and then they'll last a very long time as you never stretch the rubber too far: - http://www.4crawler.com/4x4/CheapTricks/MotorMount.shtml![[Linked Image]](http://www.4crawler.com/4x4/CheapTricks/Images/MotorMount.jpg) And yes, I know there are ground wires disconnected and hoses missing. I took that photo while I was rebuilding the engine about 12 years ago.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.003s) Memory: 0.5875 MB (Peak: 0.6357 MB) Data Comp: Off Server Time: 2026-05-25 09:17:32 UTCValid HTML 5 and Valid CSS