Gen2 auto bell housing to block bolts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen2 auto bell housing to block bolts [Re: m4ff3w] #1048738 07/04/12 05:12 AM

Joined: Feb 2005

Posts: 2,649

Livermore, Ca

Grasscat

Roll Me Over

12x40 3 ea
12x55 2 ea
10x55 2 ea
10x40 4 ea

Looking at the service manual, this is what I came up with.

You have the manual, right? If not checkout the third post on the first page.

Last edited by Grasscat; 07/04/12 05:14 AM.

Michael j

TreadLightly! Trainer

Grasscat III, 1994 Gen 2 Five speed, Stock ( for a little while )

GrassCat II, 1998 Gen 2.5 Locked and loaded. Ran off with Hector.

GrassCat I, 1991 Gen 1 Ran off with Justice.

Entire Thread
Subject	Posted By	Posted
Gen2 auto bell housing to block bolts	m4ff3w	07/03/12 08:36 PM
Re: Gen2 auto bell housing to block bolts	KrzyDav	07/04/12 04:59 AM
Re: Gen2 auto bell housing to block bolts	Grasscat	07/04/12 05:12 AM
Re: Gen2 auto bell housing to block bolts	m4ff3w	07/05/12 02:11 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.535s Queries: 16 (3.533s) Memory: 0.5994 MB (Peak: 0.6324 MB) Data Comp: Off Server Time: 2026-06-19 15:55:50 UTC
Valid HTML 5 and Valid CSS