Gen2 auto bell housing to block bolts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen2 auto bell housing to block bolts [Re: Grasscat] #1048739 07/05/12 02:11 PM

Joined: May 2011

Posts: 38

San Antonio, Tejas, USA

m4ff3w

Getting the Wheeling Fever

Thanks yall.

I tried sourcing the bolts locally - but that looks like it will cost me about $40. I'll head out to Pick N Pull this weekend.

92 Montero SR
84 Maserati Biturbo
89 Mercedes 190E
77 Fiat X1/9

Entire Thread
Subject	Posted By	Posted
Gen2 auto bell housing to block bolts	m4ff3w	07/03/12 08:36 PM
Re: Gen2 auto bell housing to block bolts	KrzyDav	07/04/12 04:59 AM
Re: Gen2 auto bell housing to block bolts	Grasscat	07/04/12 05:12 AM
Re: Gen2 auto bell housing to block bolts	m4ff3w	07/05/12 02:11 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.536s Queries: 16 (3.533s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-19 02:37:22 UTC
Valid HTML 5 and Valid CSS