because the issue is that the outer clip pulls on the outer portion of the axle and ultimately pulls the stub shaft out of the diff on the inner side. welding the clip on the outer shaft would accomplish the opposite of what needs to happen.


99 Gen 2.5, fixing blown head gasket
89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD)
Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB
-Can Change a timing belt in my sleep..