The screws in the drum are only there to remove and screw them into the threaded holes to push the drums off, they are to short to do the job, if you remove some bolts from your front hubs and use them they are long enough to push the drum off, just be careful not to bend them or you will be st the parts store buying new bolts.

Hope that helps, Dennis

95 Sportage, gone but not forgotten.
98 Jeep TJ, 4" Zone springs with RC Long arms, Ford 8.8", 4.56 gears & Detroit locker rear, D30, 4.56 & Detroit Trutrack front.