Engine in - bad noise - 4x4Wire TrailTalk

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Engine in - bad noise #1049144 07/16/12 05:32 PM

Joined: May 2011

Posts: 38

San Antonio, Tejas, USA

m4ff3w

Getting the Wheeling Fever

I got the engine in. However, when I turn it with the starter bolted up there is a not so good noise. The noise is there when turning by hand or via the starter.

I couldn't figure it out - but then went in the garage and found this:

[Linked Image]

Doh! It was still attached to the block that came out of the truck. The FWD block that I used didn't have that spacer on the crank. Engine is coming out tonight.

I can't believe I forgot it.

92 Montero SR
84 Maserati Biturbo
89 Mercedes 190E
77 Fiat X1/9

Entire Thread
Subject	Posted By	Posted
Engine in - bad noise	m4ff3w	07/16/12 05:32 PM
Re: Engine in - bad noise	off-roader	07/16/12 07:53 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.508s Queries: 15 (3.506s) Memory: 0.5930 MB (Peak: 0.6260 MB) Data Comp: Off Server Time: 2026-06-20 20:51:02 UTC
Valid HTML 5 and Valid CSS