i had this problem after my rebuild. it was the lower intake mating with the heads, because i had my heads resurfaced and they shaved a little off the intake did not want to seal right. after putting a little rtv on the matting surfaces the gasket was able to make the proper seal. i do not know if that is whats going on with you but it is worth looking at.


91 Montero LS "Sandstorm", Auto, Dual Bouncy Seats, 2" Suspension lift, 2" Body Lift, GENII front IFS, 32" MT tires

89 Raider "Trailbreaker", 3.0, Auto, Dual Bouncy Seats