Quote
this is what happens when thepo did not use die elec grease on the boots if you stick a small pocket screwdriver under the edge of the boot you can slide it around the boot to cover and free it then you should be able to twist it and pull it out then you can stick it back on the coil just put die elec grease on the contact surface when you put it back in


thats a good idea (small screwdriver), my hands are so big though it was tough enough with pliers. I tell ya, the coil packs were very loose on the boot, i couldnt twist the boot at all with the coil attached to the boot

1995 Montero SR