Driveline adapter

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Driveline adapter [Re: rxinhed] #1049498 07/29/12 08:29 PM

Joined: Mar 2006

Posts: 422

Flagstaff, Az

heathdogg

Mudrunner

Not for zombies though... I was think along the lines of using a jeep yokes on both ends when I put the 231 case so I wouldn't have to mess with trying to get the mistubishi yoke to fit on the new drivelines.

Blacktero: 90 Montero Lwb V6 RS Model. 16" Toyota Alloy Rims, Dual Bouncy's; Gen II Front Rotors & Calipers; Rear LSD

Sraider: 87 Raider 2.6 base. Work yet to be done.

Entire Thread
Subject	Posted By	Posted
Driveline adapter	heathdogg	07/27/12 04:57 PM
Re: Driveline adapter	rxinhed	07/28/12 02:34 AM
Re: Driveline adapter	heathdogg	07/29/12 08:29 PM
Re: Driveline adapter	lordtrunks	07/29/12 11:20 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.472s Queries: 16 (3.469s) Memory: 0.5997 MB (Peak: 0.6327 MB) Data Comp: Off Server Time: 2026-06-06 14:56:18 UTC
Valid HTML 5 and Valid CSS