There should be room to "twidle" still. Hard to believe it would be maxed out already. Mine was very hard to turn the 1st time I had to adjust it. I had to use long ratchet attached to a flat bit and a long extension to break mine free. It finally broke loose. Seems like I sprayed half a can of wd40 on it too.



1990 Montero LS "Bottom Feeder" LWB, 33's, Cheapass Lift, 2" body lift, Dual BoUnCyS, Dual LSD's, KC's.
1995 Montero SR Complete LS interior swap and a BoUnCy from a 96 SR. General Grabber AT2's 33X12.5. 1.5" Body Lift