'92 SR Torque Converter

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: '92 SR Torque Converter [Re: m4ff3w] #1050019 08/17/12 04:05 AM

Joined: May 2011

Posts: 38

San Antonio, Tejas, USA

m4ff3w

Getting the Wheeling Fever

Finally got it in. I had to use a couple of long bolts threaded into the mounting holes to use as a handle. I was then able to get enough leverage to get it all lined up and slotted in.

92 Montero SR
84 Maserati Biturbo
89 Mercedes 190E
77 Fiat X1/9

Entire Thread
Subject	Posted By	Posted
'92 SR Torque Converter	m4ff3w	08/15/12 02:00 AM
Re: '92 SR Torque Converter	fasteddy	08/15/12 04:42 AM
Re: '92 SR Torque Converter	m4ff3w	08/15/12 06:16 AM
Re: '92 SR Torque Converter	m4ff3w	08/17/12 04:05 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 8.824s Queries: 16 (3.488s) Memory: 0.6002 MB (Peak: 0.6332 MB) Data Comp: Off Server Time: 2026-06-20 00:45:29 UTC
Valid HTML 5 and Valid CSS