Shifter Thread types

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Shifter Thread types #1050035 08/16/12 07:22 PM

Joined: Nov 2010

Posts: 127

Hawaii

89mitsuraider Offline

Wheeler

I was wondering if someone could tell me the thread type/measurement on the GEN1 5spd, and 4x4 shift knobs. I want to do some billet aluminum ones, and I found some they make for Jeep. I appreciate any help!

Christopher

Keep On Rockin' In The Free World

88 Dodge Raider 2.6L 5spd, LSD, Bouncy seat

Entire Thread
Subject	Posted By	Posted
Shifter Thread types	89mitsuraider	08/16/12 07:22 PM
Re: Shifter Thread types	METALMOVER	08/16/12 10:49 PM
Re: Shifter Thread types	RECON45	08/16/12 11:28 PM
Re: Shifter Thread types	Ian Sharpe	08/17/12 10:55 AM
Re: Shifter Thread types	fasteddy	08/19/12 01:41 AM
Re: Shifter Thread types	Ian Sharpe	08/20/12 08:26 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.533s Queries: 15 (3.531s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-10 23:40:19 UTC
Valid HTML 5 and Valid CSS