Gen1 AC Tensioner Bracket and Pulley

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen1 AC Tensioner Bracket and Pulley #1050063 08/17/12 07:58 PM

Joined: Jan 2010

Posts: 82

Goose Creek, SC

RigilKent

Getting the Wheeling Fever

I deleted the AC in my 2.6 Gen1 while I was in Wisconsin now the navy has me living in South Caroline and its HOT!! So I am re installing AC and the thing im running into is I cant locate an AC belt tensioner bracket and pulley. If anyone can help me out that would be awesome. TIA

Rigil

84' Montero 2.6L SWB

Entire Thread
Subject	Posted By	Posted
Gen1 AC Tensioner Bracket and Pulley	RigilKent	08/17/12 07:58 PM
Re: Gen1 AC Tensioner Bracket and Pulley	Mudraider	08/20/12 03:07 AM
Re: Gen1 AC Tensioner Bracket and Pulley	cjsmontero	08/20/12 03:16 AM
Re: Gen1 AC Tensioner Bracket and Pulley	StockRaider	08/20/12 09:40 PM
Re: Gen1 AC Tensioner Bracket and Pulley	rxinhed	08/21/12 02:09 AM
Re: Gen1 AC Tensioner Bracket and Pulley	RigilKent	08/20/12 11:55 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.211s Queries: 15 (3.364s) Memory: 0.6034 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-05-25 21:38:48 UTC
Valid HTML 5 and Valid CSS