|
|
|
|
 OEM AC Receiver Drier does not fit on my GEN1
#1050319
08/25/12 12:17 PM
|
Joined: Oct 2010
Posts: 24
OP
Need a Spot
|
Anyone else run into an issue where your AC system does not seem to be stock?
Mine has a different compressor, drier and bigger hoses. I am thinking it was upgraded at some point when it was in AZ?
Problem is I cannot find a drier that will fit. It has 16MM connectors but the ones I found from Four Seasons do not work because the ID is too small for the hose to fit in. Any suggestions?
'88 Dodge Raider with only 52,000 miles!
My upgrades:
Curt 2" receiver tow hitch
Re-undercoated the wheel wells
Gen 2 padded center console cover "armrest"
Highland all-weather front mats
Double DIN JVC Receiver
Power locks with remote
|
|
|
Re: OEM AC Receiver Drier does not fit on my GEN1
[Re: sechack]
#1050320
08/25/12 04:08 PM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
Most likely dealer add on then. Time to break out the Four Season picture book, or see The Hose Man. <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
Re: OEM AC Receiver Drier does not fit on my GEN1
[Re: rxinhed]
#1050321
08/25/12 05:26 PM
|
Joined: Oct 2010
Posts: 24
OP
Need a Spot
|
According to Four Seasons the only other possibility is a part number 83175.
It has a .395 ID with 16mm fittings.
But it is aluminum and I am concerned it might not seal properly because the old one had .330 ID
'88 Dodge Raider with only 52,000 miles!
My upgrades:
Curt 2" receiver tow hitch
Re-undercoated the wheel wells
Gen 2 padded center console cover "armrest"
Highland all-weather front mats
Double DIN JVC Receiver
Power locks with remote
|
|
|
Re: OEM AC Receiver Drier does not fit on my GEN1
[Re: sechack]
#1050322
08/25/12 06:44 PM
|
Joined: Mar 2005
Posts: 1,006
Body Damage is Cool
|
Contact this guy - http://www.acsource.com/index.aspxHe used to offer dryers on the site but only a couple are listed now that don't apply here. I'd email him to see if he can source one for you.
92 Montero LS 3.0L V6 Auto, Stock, Original owner, 185,800K miles
|
|
|
Re: OEM AC Receiver Drier does not fit on my GEN1
[Re: pcc]
#1050323
08/27/12 07:11 PM
|
Joined: Oct 2010
Posts: 24
OP
Need a Spot
|
Thanks for the comment about a dealer installed option. I looked through the paperwork I got with truck and there it was. The AC was installed by ARA of Phoenix when new. I do not know if they are still in business, but I sent them an email asking about the part numbers I had. http://www.arasourcing.com/motor_vehicle_air_conditioning_driers_acumulators.html
'88 Dodge Raider with only 52,000 miles!
My upgrades:
Curt 2" receiver tow hitch
Re-undercoated the wheel wells
Gen 2 padded center console cover "armrest"
Highland all-weather front mats
Double DIN JVC Receiver
Power locks with remote
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6061 MB (Peak: 0.6709 MB) Data Comp: Off Server Time: 2026-05-29 23:27:28 UTCValid HTML 5 and Valid CSS 
