OEM AC Receiver Drier does not fit on my GEN1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: OEM AC Receiver Drier does not fit on my GEN1 [Re: sechack] #1050320 08/25/12 04:08 PM

Joined: Feb 2005

Posts: 7,458

Montero Ranch

rxinhed

Trail Leader

Most likely dealer add on then. Time to break out the Four Season picture book, or see The Hose Man. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Entire Thread
Subject	Posted By	Posted
OEM AC Receiver Drier does not fit on my GEN1	sechack	08/25/12 12:17 PM
Re: OEM AC Receiver Drier does not fit on my GEN1	rxinhed	08/25/12 04:08 PM
Re: OEM AC Receiver Drier does not fit on my GEN1	sechack	08/25/12 05:26 PM
Re: OEM AC Receiver Drier does not fit on my GEN1	pcc	08/25/12 06:44 PM
Re: OEM AC Receiver Drier does not fit on my GEN1	sechack	08/27/12 07:11 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.905s Queries: 16 (3.467s) Memory: 0.6025 MB (Peak: 0.6355 MB) Data Comp: Off Server Time: 2026-06-01 15:05:48 UTC
Valid HTML 5 and Valid CSS