Found it, Thanks!

Screw that noise. Get a set of Gen 2 coils. Believe.

John B.

From the "Come And Get It Department:"

SWB coil springs

SWB trailing arms, may not be stock; they look 'almost' identical to the '96 ones we put in. They will need new bushings all around.

Still have that 5-speed manual from a 2WD Mighty Max

2.6 short block, virtually useless, however

2.6 cylinder head with hydraulic lifters, also virtually useless at this point, condition unknown.

V-6 auto's rear end, open diff, minus a brake line, trailing arms and springs, but brakes are intact.

I'm going to want to scrap all the above to make some room before too awful long, so if you want your own Sanford and Son collection, stop on by and grab some.

Two Scoops...out!

John B.

I'll take the 2wd transmission.

I went ahead and got some Old Man Emus... Should them next week :-D

Let us know how you like them. Please include the part number and how much extra weight you regularly carry. Hope they aren't too stiff. So far, it seems there's nothing more impressive to me than Gen 2 springs in a SWB Gen 1.

John B.

Please do. Even if I'm not home, it's next to the Type R in the driveway, next to the low concrete wall. It's yours. Want me to engrave your name on it? Please take it.

Have I made myself clear?

John B.

Does anyone have a line on a roof rack?

[gauging interest] (2) Australian Magna EFI intake manifolds w/ fuel rails.

Here's a picture of one modified/installed in a USDM 4G54.



Depending on your setup, some fabrication might be required (namely, relocating TB).

We're importing (3). One is for my Starion buddy, who tells me these things go for $500-$600 when they turn up on Ebay. The plan was 1 for my buddy's Starion, 1 for my Rocinante, and 1 to sell to reimburse my mate down under for air freight halfway around the world on what are fairly large and relatively heavy items.

Now that I'm looking to sell Rocinante to get a Gen 2.5, I'm going to put mine on offer to help fund the new Monty purchase before summer.

Again, these sell for $500-$600 *when* they come available. Before I dump these on the Starion board, I'm posting here to gauge interest at $450.

Of course I'll provide pictures of the actual items once they arrive in Phoenix, likely next month.

Anyone?

PS: I'm also going to have my gen 1 (2.6, MT) Aussie crawler gears (Mark's 4WD Adapters , 48% reduction) available one of these days. New, they're $1000-ish plus shipping plus installation. I'm going to sell as a complete, ready-to-bolt-up tcase. Think $800 would be a fair price?

Thanks for looking.