Possible to pull oilpan on g54b 1st gen without pulling engine?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech Possible to pull oilpan on g54b 1st gen without pulling engine?

Print Thread

Rate Thread

Page 2 of 2

Re: Possible to pull oilpan on g54b 1st gen without pulling engine? [Re: airbats801] #1051247 09/25/12 05:44 AM

Joined: Dec 2006

Posts: 445

portland, or

airbats801 Offline

Mudrunner

Thanks guys, was pretty easy once I just pulled it straight back instead of turning it lol. New rod bearings in, new oil pump, and fixed a pinhole, and now I have a makeshift dip stick tube I stole from a starion, I just need to make a longer dipstick

8 Starion SHP, 87 mitsubishi van, , 81 galant g54bt, 78 lancer g54bt, 1965 Mitsubishi Debonair Deluxe
87 swb montero offroad pkg goin g54bt with sr locker 33x12.5 dual bouncy.

Page 2 of 2

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.005s) Memory: 0.5878 MB (Peak: 0.6433 MB) Data Comp: Off Server Time: 2026-06-13 22:55:48 UTC
Valid HTML 5 and Valid CSS