Intake/Exhaust Nuts ?'s

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Intake/Exhaust Nuts ?'s #1051427 09/14/12 02:25 AM

Joined: Jun 2012

Posts: 36

Alabama

gavin

Getting the Wheeling Fever

Can you use regular 12mm nuts from anywhere or do you have to buy special nuts for it, lost a few and tried one from ace and it doesnt seem to want to go on, but the original from my old head just runs down perfectly. Kind of lost and head is supposed to be put on saturday so running out of time thank yall for the help

88 dodge raider 2.6l

Entire Thread
Subject	Posted By	Posted
Intake/Exhaust Nuts ?'s	gavin	09/14/12 02:25 AM
Re: Intake/Exhaust Nuts ?'s	rxinhed	09/14/12 03:48 AM
Re: Intake/Exhaust Nuts ?'s	gavin	09/14/12 04:15 AM
Re: Intake/Exhaust Nuts ?'s	MontyMcV	09/14/12 12:09 PM
Re: Intake/Exhaust Nuts ?'s	fasteddy	09/14/12 02:23 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.534s Queries: 15 (3.532s) Memory: 0.6011 MB (Peak: 0.6341 MB) Data Comp: Off Server Time: 2026-06-22 14:56:15 UTC
Valid HTML 5 and Valid CSS