Lubricating the Universal Joints

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Lubricating the Universal Joints [Re: HarleyJohn] #1051803 09/21/12 11:16 PM

Joined: Sep 2009

Posts: 235

San Diego, California

DRX350

Wheeler

Good luck...

I search far and wide for that imaginary tool, doesn't exist.

So, I waited until they failed and got a new drive shaft and U-Joints for $155. These new U-Joints have the zerks on the outside. It's awesome.

"Does this part need to be in there?"

1996 Dodge 1500 single cab / short bed, 5.9 4x4; 2" lift (springs not blocks), C.A.I and more mods to come.

Entire Thread
Subject	Posted By	Posted
Lubricating the Universal Joints	HarleyJohn	09/21/12 08:23 PM
Re: Lubricating the Universal Joints	DRX350	09/21/12 11:16 PM
Re: Lubricating the Universal Joints	DennisThompson	09/24/12 05:37 PM
Re: Lubricating the Universal Joints	HarleyJohn	09/24/12 09:44 PM
Re: Lubricating the Universal Joints	Sportege_Panicmech	09/28/12 06:52 AM
Re: Lubricating the Universal Joints	HarleyJohn	09/28/12 07:48 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 16 (3.492s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-09 22:28:23 UTC
Valid HTML 5 and Valid CSS