Lubricating the Universal Joints

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Lubricating the Universal Joints [Re: HarleyJohn] #1051804 09/24/12 05:37 PM

Joined: Mar 2002

Posts: 1,396

Utah

DennisThompson Offline

Body Damage is Cool

I don't think the zerk is smaller just the space to fit the grease gun. I filed the end of my grease gun to fit better.
hope that helps, Dennis

95 Sportage, gone but not forgotten.
98 Jeep TJ, 4" Zone springs with RC Long arms, Ford 8.8", 4.56 gears & Detroit locker rear, D30, 4.56 & Detroit Trutrack front.

Entire Thread
Subject	Posted By	Posted
Lubricating the Universal Joints	HarleyJohn	09/21/12 08:23 PM
Re: Lubricating the Universal Joints	DRX350	09/21/12 11:16 PM
Re: Lubricating the Universal Joints	DennisThompson	09/24/12 05:37 PM
Re: Lubricating the Universal Joints	HarleyJohn	09/24/12 09:44 PM
Re: Lubricating the Universal Joints	Sportege_Panicmech	09/28/12 06:52 AM
Re: Lubricating the Universal Joints	HarleyJohn	09/28/12 07:48 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.490s Queries: 16 (3.487s) Memory: 0.6029 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-22 01:31:58 UTC
Valid HTML 5 and Valid CSS