Super-high (racing) rpm's on cold startup

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Super-high (racing) rpm's on cold startup [Re: MI_Mitsu] #1052100 10/05/12 08:35 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

Does your TB have a wax pellet style FIDLE valve like the 3.0 in addition to the isc?

Has the idle bypass screw been fooled with?

Has the mechanical idle stop screw been molested? What is the idle stop opening (measure with drill bits, gap from buttfly to bore wall)

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Super-high (racing) rpm's on cold startup	MI_Mitsu	09/29/12 11:58 PM
Re: Super-high (racing) rpm's on cold startup	mxmikie	09/30/12 06:01 AM
Re: Super-high (racing) rpm's on cold startup	MI_Mitsu	10/05/12 02:19 PM
Re: Super-high (racing) rpm's on cold startup	fasteddy	10/05/12 08:35 PM
Re: Super-high (racing) rpm's on cold startup	MI_Mitsu	10/05/12 09:46 PM
Re: Super-high (racing) rpm's on cold startup	fasteddy	10/06/12 08:23 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.496s Queries: 16 (3.494s) Memory: 0.6046 MB (Peak: 0.6376 MB) Data Comp: Off Server Time: 2026-06-13 09:57:49 UTC
Valid HTML 5 and Valid CSS