San Luis Auto Salvage still has a '95 in yard with only 151k on it. You could probably get everything for $300 since it's been sitting there 2 years.
I'm probably wrong but thought U joints were all the same and you only need 95's driveshaft flange to attach to Gen 1 driveshaft at the u joint.
On M.S. axle,,,I though somebody on here had put a M.S. 4.90 hybridlocker axle on one.
I need to reinvestigate this as I need to check on shock mount comparisons. The axle width, spring perches, and trailing arm perches all measure the same. I was going to use an M.S. axle but then Grasscat came to the rescue and gave me Grasscat 1's LS LSD axle <img src="/forums/images/graemlins/kewl.gif" alt="" />

Last edited by KrzyDav; 10/19/12 02:27 AM.
dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.