Strange...on my '89 Monty with the 32/36 Weber conversion, the only hose I had running to that base plate on the Weber air filter was the one from the black canister by the right headlight. As has been mentioned, I put a breather filter on the fitting on the rear of the valve cover, and when I replaced the rectangular open air filter with a snorkel-type fitting, that wasn't machined for any hoses, I stuck another breather filter into the end of the hose that used to go into the base plate of the Weber air filter. Seems to run fine either way...


1989 Monty SWB, 2.6L w/MT, 15" alloys, 265/75 Dunlop Radial rovers, rear air shocks, Weber 32/36, SQ oil cooler, (SOLD Oct 2012)
Southeast VA, USA