Follow the FSM procedures for the preload and final install. If you can change the front brakes, then you can do this. As long as they are actually worn, you should be okay to tighten them up. If that doesn't work, it's the same process to put new ones in.


Big Truck: 00, 3.5, Endeavor, 5-Spd drive line in hand!
Little Truck: 87, 2.6T I/C, MT, LSDs, Tonneau Top
Her Truck: 03, 3.8, 20th Anniv, 65k
Daughter's: 06 Eclipse, Keeping it Mitsu!
FSMs: MitsubishiLinks.com